H3C交换机恢复出厂设置
2014-07-13 09:47:19   来源:   评论:0 点击:

方法1、<H3C>reset saved-configurationThe saved configuration will be erased Are you sure?[Y N]y 提示是否擦除配置文件 Configuration in the device is being cleared Please wait
方法1、<H3C>reset saved-configuration
The saved configuration will be erased.
Are you sure?[Y/N]y /提示是否擦除配置文件/
Configuration in the device is being cleared.
Please wait ...
...
Configuration in the device is cleared.

<H3C>reboot
This command will reboot the system. Since the current configuration may have b
een changed, all changes may be lost if you continue. Continue? [Y/N] Y
/提示是否重启设备,按Y将重新启动/

【提示】
1、 可以只键入reset sa,reset sa是reset saved-configuration的缩写。
2、 擦除配置文件后,必须要重启设备后才能恢复到出厂设置。


方法2、[H3C]restore default
This will restore the default configuration in the EEPROM memory
Are you sure?[Y/N]y
Now saving default configuration to EEPROM memory
Please wait for a while...
Default configuration saved to EEPROM memory successfully


方法3、
用CONSOLE线入
交换机重新启动,出现CTRL+B时按相应的键,进入boot菜单后,选3查看文件,再选4,删除文件。
把CFG文件删除
 

相关热词搜索:交换机

上一篇:ping的高级用法
下一篇:Supermicro IPMI View 2.0基本操作教程

分享到: 收藏
评论排行